(246 products available)
Ready to Ship
The radiator cooling fan motor for Elantra is available in different types, and each serves a specific purpose.
Shroud-mounted fan motors
The motor is mounted inside the fan shroud, which is a housing structure around the fan. This design helps direct airflow through the radiator for better cooling efficiency. Shroud-mounted motors are commonly used in Elantra cars with conventional cooling systems.
Fan hub-mounted motors
In this design, the motor is mounted on the fan hub, which connects the fan blades to the shaft. The fan hub is then attached to the radiator, securing all components in place. Fan hub-mounted motors are typically found in Elantra models with a front-mounted radiator.
Dual fans motors
Some Elantra variants have two cooling fans instead of one. In these cases, a dual fan motor powers both fan assemblies. This setup provides higher airflow capacity, making it suitable for performance-oriented vehicles or those operating in hot climates.
Variable speed motors
In modern cooling systems, especially those integrated with hybrid or electric vehicles, variable-speed motors are used. These motors adjust their speed based on the coolant temperature and airflow requirements. As a result, they consume less power and operate more quietly than fixed-speed fan motors.
Brushless DC motors
Brushless fan motors are becoming popular in newer Elantra models, mainly due to their energy efficiency, longevity, and low maintenance requirements. These motors are powered by direct current and have a brushless design, eliminating the need for regular brush replacement. While more expensive than other motor types, the long-term benefits and savings are significant.
The specifications of the radiator cooling fan motor are based on the Hyundai Elantra model and year.
Motor Type:
The radiator cooling fan motor has a direct current (DC) motor. The motor is powered by the car battery. The motor generates less noise and has a longer lifespan.
Voltage:
The radiator cooling fan motor operates on a voltage of 12 volts. This is the standard voltage for most car electrical systems.
Current Draw:
The current draw of the motor ranges from 5 to 10 amps. This indicates how much current the motor draws from the electrical system.
Speed:
The radiator cooling fan motor has a single or dual-speed motor. The motor speed is measured in revolutions per minute (RPM). The motor speeds range from 1,500 to 3,000 RPM. The motor speed is controlled by the car's engine control unit (ECU) based on the coolant temperature.
Cooling Capacity:
The cooling capacity of the fan is measured in cubic meters per hour (m³/h) or liters per second (L/s). The cooling capacity ranges from 2000 m³/h to 3500 m³/h. This indicates the volume of air the fan moves to cool the radiator. The fan cooling capacity is also dependent on the motor speed.
Size and Mounting:
The motor size and mounting specifications are based on the Elantra model. The motor is mounted using bolts or clips. The radiator cooling fan motor for Elantra measures 30 cm in diameter and 5 cm in height.
Bearings:
The fan motor uses sealed ball bearings. These bearings require minimal maintenance and provide a smooth operation.
Material:
The fan is made from high-grade plastic or composite materials. This makes the fan lightweight and resistant to corrosion.
Control:
The motor speed and operation are controlled by a PWM controller (Pulse Width Modulation). The controller is based on the coolant temperature and the engine's speed. This ensures optimal cooling and fan operation.
Temperature Range:
The motor can operate in a temperature range of -40°C to 125°C (-40°F to 257°F). This makes the motor function in extreme weather conditions.
The specifications of the radiator cooling fan motor for Elantra are based on the model and year. For instance, the 2023 Elantra uses a 12-volt motor with a speed of 3,000 RPM and a cooling capacity of 3,500 m³/h.
The radiator cooling fan motor for Elantra requires little maintenance. Ensure the electrical connections are clean and tight. Check for loose or broken mounting hardware and replace them. Inspect the motor, fan blades, and housing for damages. Replace the motor and fan blades if there are any damages. Clean the fan blades and housing to remove dirt and debris. The fan motor for Elantra should be tested to ensure it is working properly.
The motor of the cooling fan assembly is one of the most important parts of the cooling system because it makes sure that air flows through the radiator to keep it from overheating. When selecting the right cooling fan motor for the radiator, consider the following factors:
Most radiator fan motors are easy to replace. Car owners with basic mechanical skills can replace the motor themselves. Before beginning, it's important to read the car repair manual to find the exact location of the fan motor. Below are the steps on how to replace the motor.
Gather all the necessary tools that will be needed for the replacement. This will include screwdrivers, pliers, a socket wrench set, and a multimeter. Purchase a motor cooling fan that is compatible with the Elantra model from a dealer. It's also important to check the warranty period.
Disconnect the battery:
For safety reasons, disconnect the battery before starting any work on the cooling system.
Remove the electric connector:
Locate the connector and disconnect it. The connector is found at the back of the fan motor.
Remove the fan assembly:
Locate the bolts holding the fan assembly and remove them. Once the bolts are removed, pull the fan assembly out of the vehicle.
Remove the old motor:
Unscrew the bolts that are holding the motor to the fan. Then, pull the motor out of the fan.
Install the new motor:
Place the new motor into the fan and secure it with bolts. Then, reconnect the electrical connector.
Reinstall the fan assembly:
Put the fan assembly back in place and tighten the bolts. Reconnect the battery.
Start the vehicle's engine and ensure the fan is running properly. Check for any leaks around the fan.
Q1: What is the work of the radiator fan motor?
A1: The motor is responsible for driving the radiator fan. It allows the fan to spin at the appropriate speed to cool down the car.
Q2: What happens to Elantra s when the radiator fan motor is faulty?
A2: When the radiator fan motor is faulty, the fan may not spin, or it may spin at the wrong speed. Either case will lead to the radiator not cooling the Elantra effectively. This can cause the car to overheat.
Q3: Can the radiator fan motor be upgraded?
A3: Yes, a more powerful motor can be installed. This will ensure that the fan moves more air, increasing the cooling effect. However, only a motor whose specifications match those of the Elantra should be used.
Q4: How is the motor connected to the fan?
A4: The motor is connected to the fan using a shaft. It spins the fan blades via this shaft, allowing the fan to generate airflow.
Q5: What controls the radiator fan motor?
A5: The motor is controlled by the car's cooling system. It is controlled based on the temperature of the coolant, which is water mixed with antifreeze. When the coolant temperature exceeds a certain point, the motor is activated to cool the car down.
浙公网安备 33010002000092号
浙B2-20120091-4