(130 products available)
Ready to Ship
Ready to Ship
The composition of 61834 bearings covers several categories. Here are some of the general types used in various settings:
Deep groove ball bearings
This kind is the most common and known for its versatility. It is used in radial and axial load support due to its structure, which makes it applicable in multiple industries, such as automotive and machinery manufacturing.
Thin-walled ball bearings
The construction of these bearings supports them with a thin outer and inner raceway. Because of their thin structure, they are used where space constraints are a vital concern. The 61834 is a kind of thin-walled deep groove ball bearing.
Single-row ball bearings
This type of bearing consists of one single row of balls. The bearing 61834 is a single-row deep groove ball bearing and is widely used in various applications.
High-speed ball bearings
These bearings are specially designed for operations at high speeds. They tend to have a retainer made of some lightweight material like nylon. These bearings are generally applied in electric motors and turbines.
Angular contact ball bearings
The structure of these bearings allows them to bear axial and radial loads. They are often used in applications where components are subjected to axial load in one direction. To achieve greater load capacity, several 61834 bearings can be combined with other angular contact bearings.
Special ball bearings
These bearings are made to be used under extreme conditions, for example, high or low temperatures and exposure to aggressive chemicals. They can be designed from materials that are not affected by such conditions.
Automotive industry
The 61834 deep groove ball bearing is used in the automotive industry to assist in the wheels, electric motors, air conditioning compressors, and other rotational components. There is a need for precise and high-performance elements in this huge space, which is fulfilled by the 61834 bearing.
Industrial machinery
Various machinery and equipment used in factories and production units employ the 61834 bearing. It increases the efficiency of motors, pumps, gears, and conveyors and reduces friction and wear.
Aerospace
The aerospace systems call for bearings with very high reliability. The 61834 bearings fit rotatory components in this space and promise performance and safety.
Electronics
Computers, printers, and electric fans employ the 61834 bearing to reduce the friction of the cooling fan and ensure smooth rotation. Because of its miniature size, the bearing can be effectively used in gadgets where space is needed.
Medical Equipment
Medical commutation machines, such as ventilators, imaging devices, and others, require 61834 bearings. They enable these sensitive machines to operate smoothly and provide accurate results.
Construction machinery
The 61834 bearings enable rotational movement in heavy machinery such as excavators, loaders, and many others. They are durable enough to give support under extreme settings, common in the construction work environment.
The61834 deep groove ball bearing
is used in heavy machinery, such as excavators and loaders, and in many other construction equipment. They are durable enough to support extreme conditions that are common in the construction work environment and enable the smooth rotation of components.Home Appliances
Refrigerators, washing machines, and other household equipment use the 61834 bearing. The bearing helps ensure smooth operation and extend the lifespan of these devices.
Renewable Energy
Wind turbines use the bearing in rotor assemblies and other movable parts. The 61834 bearing is designed to be durable and efficient, suitable for the long-term operation required in renewable energy systems.
Stable quality
The design of 61834 bearings ensures that their quality remains constant in all working conditions. This is especially necessary for machinery where failure can cause significant downtime.
Long service life
Deep groove ball bearings typically have a long service life, which is especially true for 61834 bearings. They are made of durable materials and optimized designs that withstand friction and wear.
Easy installation
The design of 61834 bearings allows their easy installation into various types of equipment. This reduces the work required to fit them in place and makes the adoption process faster.
Low friction
Due to their deep groove structure, 61834 deep groove ball bearings can rotate smoothly while experiencing minimal friction. This decreases wear and tear on both the bearing and the machinery in which it has been installed. Hence, it is efficient and consumes less energy.
Compatible with seals and shields
The 61834 bearing can be fitted with seals or shields to prevent contamination by dust and other particles, thereby increasing the bearing's lifespan. Depending on the application, these additions aid in the working of the bearings.
High load capacity
The 61834 bearing can support heavy radial and moderate axial loads, making it ideal for tough working conditions such as in heavy machinery or automotive components.
Preparation
Before embodiment, clean the bearing and housing accordingly. The components to be used should be lubricated to ensure smooth function.
Housing preparation
Set the outer race of the bearing into the bearing housing. The outer ring should fit well without being loose or tightly bound.
Inner race installation
Press the inner race onto the shaft using an installer or hydraulic press. The inner race should be centered perfectly on the shaft.
Assembly
Position the bearing on the shaft's inner race and slide it into the housing. Make sure the bearing is well seated. If there is a need for adjustment, slightly move the inner race to ensure a good fit inside the housing.
Securing the bearing
Secure the bearing by fastening the housing to the machinery or component it's intended to be used in. Also, ensure the position of the shaft remains fixed in relation to the bearing.
Lubrication
For the installed bearing to function as expected, apply the right amount of lubricant to it. Lubrication decreases friction and keeps it running for a long time.
Alignment
Ensure the shaft and housing bearing are well aligned after installation. Misalignment can cause quick wear and tear or even disasters.
Routine checks
The 61834 bearings should be inspected regularly; this involves checking for signs of wear and tear. Look over for any physical damage or irregular sounds coming from the bearing as this may be an indicator.
Lubrication
Apply the suitable type of lubricant to the bearings to ensure smooth working. Avoid using excess amounts, as this may cause damage, but do not leave it dry either, as the lack of lubricant will lead to problem creation. Striking a balance between too much and too little is crucial to the bearing's health.
Temperature monitoring
Bearings that overheat are likely to experience failures. Monitor the bearing's temperature, and if it becomes too hot, it may need additional lube or replacement.
Vibration analysis
Check out vibration dampers that double as vibration monitors
for bearings. A slight increase in vibration can be a strong indicator of internal problems. Vibration analysis can be helpful in predicting bearing failure even before it happens.Contamination control
Keep the bearing environment clean and free from dirt, dust, and moisture. These elements can damage the bearing and cause it to wear out faster than normal. Ensure the seal, when present, is intact and doing its job.
"End of Life" Prediction
The 61834 bearing must come off the machine after some time, irrespective of how well it has been maintained. Good indicators of its time are decreased performance, excessive noises, and physical deterioration. One needs to be well involved in the bearing's life cycle to effectively schedule its replacement when the time comes.
Material quality
The bearing steel has to be of great strength, corrosion proof, and wear resistance for the bearings to function effectively. The metals used have to be well identified and noted to resist deformation, especially under great load and temperature conditions.
Manufacturing precision
The raceway, because of the 61834 bearing, has to be made with fine precision so that it can rotate smoothly with minimal friction. Any discrepancies in the shape or size can lead to unequal wear and bearing failure.
Heat treatment
The 61834 deep groove ball bearing is treated thermally to increase its hardness and strength. Proper heat treatment ensures the bearing can bear loads and operate under tough working conditions.
Seals and shields
Every genuine bearing is fitted with seals or shields to prevent contaminants from entering and affecting the ball and raceway. One must also ensure that these seals are made of good material and are well installed and intact for proper bearing functioning.
Lubricant
Manufacturers advise a bearing lubricant that reduces friction and provides a protective layer between bearing balls and raceway. Excess or lack of lubricant can cause bearing failure, so one has to care for the correct quantity of lubricant in the bearing at all times.
Load ratings
The 61834 bearing is designed for specific loads and speeds. Going beyond these ratings can cause bearing failure. As well as this, one must use the bearing in the right application, according to how it was designed by the manufacturer.
Contamination control
Dust, moisture, and other contaminants can cause great damage to the bearing. Try as much as possible to keep the bearing housing area as clean as possible, and if it contains seals, ensure those seals are well fitted and intact.
Safety Standards
The 61834 bearings must be products that meet local and international safety standards. Some of these safety standards are the results of bearing manufacturer guidelines for handling, operating, and disposing of mechanical components.
A1: The auto, industry, machinery, aerospace, electronics, medical, construction, home appliances, and renewable energy industries use the 61834 bearing.
A2: For the 61834 to last long, the lubrication level in the bearing has to be maintained, external temperature must be monitored, contamination has to be controlled, and regular checks need to be done on the bearing to look for possible signs of wear and tear.
A3: The manual put across by the manufacturer must be referred to see the correct procedures for installation, usage, and maintenance. To get a bearing with a longer lifespan, one must ensure it's properly installed and maintained.
A4: Bearing features include stable quality, ease in installation, high load capacity, a long service life, low friction, and compatibility with the shield and seals.
A5: The common function of 61834 bearings is radial and axial loads for light and moderate intensities, providing smooth operation in applications where there are space constraints.
浙公网安备 33010002000092号
浙B2-20120091-4