(3 products available)
Some types of 6x0 959 855 b devices are as follows:
6X0 959 855 B
It is a standard wheel control module, often referred to as the ""6X0 959 655 B"". It is compatible with many automobile brands. If car dealers want to use it in their cars, they need to adapt it to the car's existing systems and interfaces.
6X0 959 855 C
It is a control module for car keyless entry and remote control systems, also known as the ""6X0 959 655 C"". It controls the keyless entry system, enabling functions like remote locking, unlocking, trunk opening, and panic alarm. It communicates with the vehicle's body control module to facilitate these functions. This module is particularly important for cars equipped with keyless entry or remote control systems.
6X0 959 855 D
It is responsible for controlling the car's keyless ignition system, allowing the driver to start the engine with a key fob without inserting a key. This module interacts with the engine control module and the body control module to permit engine start-up when the key fob is detected inside the vehicle. This module is vital for cars with a keyless ignition system.
6X0 959 855 F
It is a control module for the car alarm system, also known as the ""6X0 959 655 F"". It monitors the vehicle's security status and controls functions such as door locking, window closing, and alarm triggering. It communicates with other modules, like the body control module and the engine control module, to activate the alarm in case of unauthorized access or tampering. This module is especially important for cars equipped with alarm systems.
6X0 959 855 E
It is a control module for the car's central locking system, also known as the ""6X0 959 655 E"". It controls the locking and unlocking of doors, trunk access, and other related functions. It communicates with the body control module and other subsystems to ensure the car's central locking system's coordination and functionality. This module is essential for controlling the car's central locking system.
Below are the specifications of 6X0 959 855 B.
Connection:
The button box connects to the car's central electronics (CE) system through a 6-pin connector. This allows the button box to communicate with other systems in the vehicle.
Vehicle platform:
The button box is used in vehicles built on the Volkswagen Group's MQB platform. This includes many popular models from brands like Volkswagen, Audi, SEAT, and Škoda.
Functionality:
The button box is a multifunctional control panel. It allows the driver to access various functions and features of the vehicle easily. This can include controls for the infotainment system, climate control, and other adjustable settings.
Software version:
The button box is associated with the Volkswagen Group's MQB platform. This includes many popular models from brands like Volkswagen, Audi, SEAT, and Škoda.
Compatibility:
It is essential to ensure that the button box is compatible with the specific version of the MQB platform used in the car. This can vary depending on the model and year of the vehicle.
Functionality:
The button box provides quick access to various functions and features of the vehicle. This can include controls for the infotainment system, climate control, and other adjustable settings.
Software version:
The button box is associated with the Volkswagen Group's MQB platform. This includes many popular models from brands like Volkswagen, Audi, SEAT, and Škoda.
Maintaining the 6X0 959 855 B button box is essential to ensure its proper functionality and longevity. Here are some general maintenance tips:
Regular cleaning:
Clean the button box regularly to prevent dust, dirt, and debris buildup. A soft, damp cloth can clean the surface and buttons. Avoid using harsh chemicals or abrasive materials that could damage the coating or markings.
Check the connector:
Periodically inspect the 6-pin connector and its ports to ensure they are clean and free of corrosion or damage. A dirty or damaged connector can cause communication problems with the CE system.
Monitor button functionality:
Pay attention to the functionality of the buttons in the control box. If any buttons become unresponsive or have intermittent issues, investigate the cause and take necessary measures. This can involve cleaning, checking the internal connection, or, if necessary, replacing the button box.
Choosing the right 6x0 959 855 B car accessory for a specific vehicle requires careful consideration of several factors to ensure compatibility, functionality, and quality. Here are some tips:
Many people are used to DIY activities in their daily lives. Replacing the 6x0 959 855 b can be done as long as the necessary skills have been acquired. Before getting into the process, here are the tools needed:
Once the tools are ready, follow the steps below.
Ensure that the vehicle is turned off. This will help avoid any electrical issues or settings changes that might occur when the car is on.
Start by disconnecting the battery. This will help avoid any short circuits or damage to the electrical system of the vehicle.
With a Torx screwdriver, remove the screws fastening the module and then use a trim removal tool to carefully pry it off from the dashboard or center console.
Place the module control 6x0 959 855 b in the same location where the old one was. Then use a Torx screwdriver to fasten it and be sure to install it in a proper way so that it can function well.
Connect the battery and ensure that all the connections are done properly. This will help avoid any electrical issues.
Plug the OBD-II scanner into the vehicle's diagnostic port. Follow the instructions on the scanner to program the new module. This step is important to ensure that the module communicates with the rest of the vehicle's systems.
Start the vehicle and test the functions controlled by the module. Ensure that everything is working correctly before reassembling any trim or console pieces.
Once everything is done perfectly and in a good way, assemble all the parts that were removed during the process. Do a final check to ensure everything is in place and functioning.
Q1: Can someone buy a new car and use a used 6x0 959 855 b module?
A1: No, one cannot use a previous used module on a new or different car. The used module must be exactly the same as the one that was originally in the new car. Even then, it may need to be reprogrammed to work properly. Each module is set up for a specific car's configuration. If it is not exactly the same, it could cause errors.
Q2: What is the difference between the 6x0 959 855 b and 6x0 959 855 c?
A2: The 6x0 959 855 B is a standard comfort control module, while the 6x0 959 855 C is an updated version with more features. The 6x0 959 855 C module may be used for advanced functions like keyless entry, trunk opening by button, or other convenience features. It is important to check what functions are supported by each module to ensure they match what is needed in the vehicle.
Q3: What should one do if the 6x0 959 855 b module is not working?
A3: First, check the connections to ensure they are plugged in tightly. Loose cables can cause problems. If it is still not working, the module may need to be reprogrammed or replaced. Updating with new software from a dealer can fix some issues. Other times, the whole module needs changing.
Q4: Does the 6x0 959 855 b have a warranty?
A4: Some comfort control modules have a one-year or 12-month warranty, while others only offer a three-month warranty. The warranty period is different depending on the manufacturer.
Q5: Can the 6x0 959 855 b module be used for any vehicle?
A5: No, the 6x0 959 855 6 is not a universal module. It is designed for specific models of VW, Audi, Seat, and Skoda cars. One needs to check if it matches the car's make, model, and year before using it.
浙公网安备 33010002000092号
浙B2-20120091-4